Can I Paint Over Old Glue From A Blacksplash

• How To'due south & Quick Tips

Solved! Yes, You lot Tin Tile Over Tile

Does your tile need an update? Larn how you save time and endeavour in this DIY task—so long as you lot follow these rules of pollex for installation.

Photograph: istockphoto.com

Q: I want to re-tile my floor, but I'd rather not become through the hassle of ripping up the existing flooring offset. Tin can you tile over tile in order to save time?

A: The short answer is, well-nigh likely, yep. If your tiles are in relatively good condition—evenly placed, without cracks, and not actualization to retain any moisture—then you lot can probably exit them underneath your new layer of tile when going about installing a new floor or even a backsplash.

Assess the existing tile.

Before you begin tiling over tile, acquit a thorough cess of the base layer to pinpoint whatsoever surface irregularities, which can cause foundational bug downward the route. Mildew and deep discoloration in the grout frequently bespeak an assimilation effect–pregnant that trapped h2o has damaged the grout and could thus rot the new tile from below.  An absorption issue volition fester and worsen when the tiles are covered up. Also, if the original tiles were non properly installed, the new overlaying tiles won't lie apartment or line up. If you lot practise observe either of these issues, it'due south improve to outset from scratch than to tile over the existing floor.

Find trusted local pros for any home project

+

Prepare the surface for installation.

Tiling over an uneven surface will give you less-than-stellar results, and so level out any globs of dried grout with a sander and secure loose tiles with fresh tile adhesive earlier offset the project. Then, lay out your new tiles and cut them to fit around the walls and fixtures, as necessary. Once all pieces of tile are cut to size, move them out of the fashion then that you can scrub down your base layer with a degreasing soap. Let the surface dry completely before you lot start taping off the edges of the project surface area with painter'southward tape and laying out plastic sheets to protect surrounding surfaces.

Photograph: istockphoto.com

Lay the groundwork for the new tile in stages.

Generally speaking, thin-set adhesive (also known equally thin-set mortar) is great for setting tiles in areas subject to moisture, like bathrooms, while mastic adhesive is best for drier spaces, similar kitchens. Scoop the adhesive of choice from its bucket with a trowel and apply a sparse layer to a department of tiles only a few anxiety wide, for starters. Don't attempt to cover a total floor or backsplash at in one case; since curing times may vary, you lot'll want to prepare each tile before the bonding agent is too dry to do its job. Score the surface adhesive with the toothed edge of your trowel past drawing direct lines along the wet surface, as these grooves aid in the drying and adhesion process.

Position the tile as you become.

Set each tile atop the agglutinative yous've scored and firmly press it into place. Once these are in identify, you tin can rotate through spreading adhesive, scoring, and laying tile until you've completely covered the space.

Tip: To relieve even more than time, apply your agglutinative direct to the back of your new tiles rather than prepping the area with thin-set up adhesive. This method, though, should be saved for situations where the original tile is in perfect condition and you're really only looking for a temporary fix until you can endeavour a more in-depth renovation project—placement this way won't ready the tiles so securely that they last for generations without needing repair. Take a cue from the blogger at Renov8or, who chose to lay well-baked white subway tile over an erstwhile layer of beige squares in the kitchen merely by applying silicone adhesive to the back of each private tile, and placing them over the old tile with spacers in betwixt to save infinite for even grout lines. While silicone isn't a recommended agglutinative for tiles that volition encounter lots of h2o (a shower wall, for example), this simple fix could cut your project time in one-half on areas where heavy splashing won't exist a concern in the long run.

Finally, seal off your piece of work.

No matter what kind of agglutinative you've used below the new layer of tiles, you'll need to use grout in the grooves between them. This pace protects the unabridged surface from moisture creeping into the seams between each tile and leading to water harm or out-of-sight mildew growth. For the sake of speed, use premixed grout from the hardware shop, and use it quickly in a single round. Or yous tin choose to mix the grout yourself; just be certain to use an awarding tube with an opening pocket-size enough to fit the troughs you're filling.

So, in short, you can tile over tile as long as you're working on a fairly sound surface. The surface of the existing tile should be free of mold and mildew, completely level (including grout), and without any warping or strangely-placed tiles that might otherwise interfere with a smooth new layer. Also, keep in listen that it's best not to lay heavy new tile over existing tile floors unless the foundation beneath both is physical. Otherwise, the excess weight can cause structural issues. Now go forth and enjoy your new, easy-to-install tile surface!

Discover trusted local pros for whatever domicile projection

+

Source: https://www.bobvila.com/articles/can-you-tile-over-tile/

Posted by: phillipsforand.blogspot.com

Share this post